PP weathering masterbatch LS-133F

LS-133F

Features

Product introduction

（1）This product is a PP functional weather-resistant masterbatch prepared by using a variety of efficient anti-aging additives and carrier resin through special production and processing technology, which can endow PP composite materials, especially outdoor products with outstanding long-term thermal oxygen. Stability, efficient photostability and weather resistance, which can significantly extend its service life. Mainly have the following characteristics:

（2）(1) It can absorb and shield a wide range of ultraviolet wavelengths, and can effectively resist the aging problem of PP products caused by heat, oxygen, light, environmental climate and other factors during outdoor use.

（3）(2) The anti-aging ingredient has excellent dispersibility in PP, high stability and long-lasting action time, which ensures the full play of its anti-aging effect;

（4）(3) The melt fluidity and excellent compatibility with the PP material matrix resin are easy to achieve blending and uniform dispersion;

（5）Excellent processing stability, to ensure the stable operation of production and improve production efficiency.

Product introduction

（1）This product is a PP functional weather-resistant masterbatch prepared by using a variety of efficient anti-aging additives and carrier resin through special production and processing technology, which can endow PP composite materials, especially outdoor products with outstanding long-term thermal oxygen. Stability, efficient photostability and weather resistance, which can significantly extend its service life. Mainly have the following characteristics:

（2）(1) It can absorb and shield a wide range of ultraviolet wavelengths, and can effectively resist the aging problem of PP products caused by heat, oxygen, light, environmental climate and other factors during outdoor use.

（3）(2) The anti-aging ingredient has excellent dispersibility in PP, high stability and long-lasting action time, which ensures the full play of its anti-aging effect;

（4）(3) The melt fluidity and excellent compatibility with the PP material matrix resin are easy to achieve blending and uniform dispersion;

（5）Excellent processing stability, to ensure the stable operation of production and improve production efficiency.

Specifications

Basic physical properties and uses of the product

Exterior	Translucent particles, uniform color, no impurity dust
granularity	Φ（2.0～4.0）mm×（2.4～4.0）mm
Melt finger（g/10min） 230℃，2.16kg	35
Heat resistance	≥300℃
Active ingredient content	≥40%
Application	It is suitable for outdoor PP products that require long-term weather resistance, including inorganic powder filled and glass fiber reinforced PP composite materials.

Product performance

Weather resistance of outdoor PP composite material (10% talc content) after applying this product

Test items	Xenon lamp aging cycle	Test result
Test items	Xenon lamp aging cycle	Test value	Retention rate，%
Tensile Strength，MPa	original	20.3	/
Tensile Strength，MPa	1000h	20.0	99
Elongation at break，%	original	460	/
Elongation at break，%	1000h	409	89
Cantilever Notch Impact strength，kJ/ m2	original	49	/
Cantilever Notch Impact strength，kJ/ m2	1000h	44	90
Gray Card Rating	1000h	3-4	/

Note: The addition ratio of this product is 2%. The above data are typical results of the test. They are used as a basic reference for related applications and cannot be used as product specifications or guarantees in any form. The specific addition amount can be based on relevant actual applications, product specifications and weather resistance requirements. Increase or decrease as appropriate.

Basic physical properties and uses of the product

Exterior	Translucent particles, uniform color, no impurity dust
granularity	Φ（2.0～4.0）mm×（2.4～4.0）mm
Melt finger（g/10min） 230℃，2.16kg	35
Heat resistance	≥300℃
Active ingredient content	≥40%
Application	It is suitable for outdoor PP products that require long-term weather resistance, including inorganic powder filled and glass fiber reinforced PP composite materials.

Product performance

Weather resistance of outdoor PP composite material (10% talc content) after applying this product

Test items	Xenon lamp aging cycle	Test result
Test items	Xenon lamp aging cycle	Test value	Retention rate，%
Tensile Strength，MPa	original	20.3	/
Tensile Strength，MPa	1000h	20.0	99
Elongation at break，%	original	460	/
Elongation at break，%	1000h	409	89
Cantilever Notch Impact strength，kJ/ m2	original	49	/
Cantilever Notch Impact strength，kJ/ m2	1000h	44	90
Gray Card Rating	1000h	3-4	/

Note: The addition ratio of this product is 2%. The above data are typical results of the test. They are used as a basic reference for related applications and cannot be used as product specifications or guarantees in any form. The specific addition amount can be based on relevant actual applications, product specifications and weather resistance requirements. Increase or decrease as appropriate.

Instructions

Instructions

The masterbatch and the raw materials are directly mixed evenly, and the processing and production can be carried out. The recommended addition amount is about 2-4%, which can be adjusted according to the actual requirements.

Package

The product is packaged in a 25KG paper-plastic bag, please store it in a ventilated and dry place with a cushion underneath to avoid sunlight and rain.

Instructions

The masterbatch and the raw materials are directly mixed evenly, and the processing and production can be carried out. The recommended addition amount is about 2-4%, which can be adjusted according to the actual requirements.

Package

The product is packaged in a 25KG paper-plastic bag, please store it in a ventilated and dry place with a cushion underneath to avoid sunlight and rain.

Prev: PP Anti-UV Masterbatch LS-133U

Next: Polycarbonate Anti-UV Masterbatch LS-141

Interested? Let’s talk.